IBM P 615 series

Table 1. Service Processor Checkpoints (continued)
Checkpoint Description Action/
Possible Failing FRU
9021 Service processor state set to standby See note 1 on page 138.
9022 Service processor state set to IPL See note 1 on page 138.
9023 Service processor state set to runtime See note 1 on page 138.
9024 Service processor state set to terminate See note 1 on page 138.
9025 Service processor state set to DPO See note 1 on page 138.
9030 Waiting for secondary thread
acknowledgement
See note 1 on page 138.
9033 I/O base initialization See note 1 on page 138.
9034 I2C initialization See note 1 on page 138.
9035 ISA initialization See note 1 on page 138.
9036 Mailbox initialization See note1 on page 138.
9037 SLLA initialization (VPD) See note 1 on page 138.
9038 NVRAM initialization See note 1 on page 138.
9039 Serial port initialization See note 1 on page 138.
903A Serial I/O initialization See note 1 on page 138.
903B SPCN initialization See note 1 on page 138.
9051 End of reset/reload operation: service
processor dump has completed
See note 1 on page 138.
9055 Start menus thread See note 1 on page 138.
9060 Checking/configuring modem on serial port
1
See note 4 on page 138.
9061 Checking/configuring modem on serial port
2
See note 4 on page 138.
906A Create mailbox processing thread See note 1 on page 138.
906B Create menu interface thread See note 1 on page 138.
906C Create general thread See note 1 on page 138.
906D Create SPCN thread See note 1 on page 138.
9070 Create thread to control LEDs on I/O
subsystems
See note 1 on page 138.
9071 Initialize thread to control LEDs on I/O
subsystems
See note 1 on page 138.
9080 Start VPD collection program See note 1 on page 138.
9081 Start SC VPD data collection See note 1 on page 138.
9082 I2C/SPCN VPD data collection See note 1 on page 138.
9083 End SC VPD data collection See note 1 on page 138.
9084 End I2C/SPCN VPD data collection See note 1 on page 138.
90FD Waiting for IBIST to complete See note 1 on page 138.
9101 Setup load source See note 1 on page 138.
9102 Open load source See note 1 on page 138.
9103 Verify open status of load source See note 1 on page 138.
134 EserverpSeries 615 Service Guide