IBM P 615 series

SCSI IDs and Bay Locations
The following illustrations show the SCSI bay locations for the pSeries 615 Model 6C3 and Model 6E3.
Note: One disk drive backplane (on the right, closest to the media bays, as viewed from the front of the
system) is standard in the Model 6C3 and Model 6E3; a second backplane can be added. In the
following figure, the systems are shown fully populated with two backplanes and eight disk drives.
Model 6C3
1
2
3
5
4
6
8
10
11
12
9
7
Index Drive Name SCSI ID
1 Operator Panel
2 Diskette Drive
or IDE Optical Drive
Location code U0.1-P1-X1-D1 for a diskette drive or
U0.1-P1-X1/Q6-A1 for an optical drive
3 IDE CD-ROM (Default)
or IDE DVD-ROM (Optional)
IDE (Non-SCSI)
(U0.1-P1-X1/Q6-A0)
4
Tape Drive (Optional) SCSI ID 0
SCSI DVD-RAM (Optional) SCSI ID 0
5 Disk Drive 1 SCSI Bus 0 SCSI ID 3
6 Disk Drive 2 SCSI ID 4
7 Disk Drive 3 SCSI ID 5
8 Disk Drive 4 SCSI ID 8
9 Disk Drive 5 SCSI Bus 1 SCSI ID 3
10 Disk Drive 6 SCSI ID 4
11 Disk Drive 7 SCSI ID 5
12 Disk Drive 8 SCSI ID 8
20 EserverpSeries 615 Service Guide