IBM P 615 series User Manual

Problem Determination Generated Error Codes
Table 10. Problem Determination Generated Error Codes
Error Code Description Action/
Possible Failing FRU
M0BT 0000 The system hung during speaker POST. This
error code is generated by the customer
performing “Problem Determination” in the
Eserver pSeries 615 Model 6C4 and Model
6E4 User’s Guide.
Go to “MAP 1540: Problem Isolation Procedures”
on page 110.
M0BT 0001 The system hung during “Starting Software...”.
This error code is generated by the customer
performing “Problem Determination” in the
Eserver pSeries 615 Model 6C4 and Model
6E4 User’s Guide.
Go to “MAP 1540: Problem Isolation Procedures”
on page 110.
M0KB D000 The system hung during keyboard POST. This
error code is generated by the customer
performing “Problem Determination” in the
Eserver pSeries 615 Model 6C4 and Model
6E4 User’s Guide.
1. Keyboard
2. Service processor
Location:
U0.1-P1-X1
M0KB D001 The system did not respond to a keyboard entry.
This error code is generated by the customer
performing “Problem Determination” in the
Eserver pSeries 615 Model 6C4 and Model
6E4 User’s Guide.
Type 101 keyboard
1. Keyboard
2. Service processor
Location:
U0.1-P1-X1
M0KB D002 The system did not respond to a keyboard entry.
This error code is generated by the customer
performing “Problem Determination” in the
Eserver pSeries 615 Model 6C4 and Model
6E4 User’s Guide.
Type 102 keyboard
1. Keyboard
2. Service processor
Location:
U0.1-P1-X1
M0KB D003 The system did not respond to a keyboard entry.
This error code is generated by the customer
performing “Problem Determination” in the
Eserver pSeries 615 Model 6C4 and Model
6E4 User’s Guide.
1. Keyboard
2. Service processor
Location:
U0.1-P1-X1
M0ME M002 The system hung during memory POST. This
error code is generated by the customer
performing “Problem Determination” in the
Eserver pSeries 615 Model 6C4 and Model
6E4 User’s Guide.
Go to “MAP 1540: Problem Isolation Procedures”
on page 110.
M0NE T000 The system hung during network POST. This
error code is generated by the customer
performing “Problem Determination” in the
Eserver pSeries 615 Model 6C4 and Model
6E4 User’s Guide.
Go to “MAP 1540: Problem Isolation Procedures”
on page 110.
M0PS 0000 Power failure. This error code is generated by
the customer performing “Problem
Determination” in the Eserver pSeries 615
Model 6C4 and Model 6E4 User’s Guide.
Go to “MAP 1520: Power” on page 98.
M0SC SI00 Unable to load diagnostics. This error code is
generated by the customer performing “Problem
Determination” in the Eserver pSeries 615
Model 6C4 and Model 6E4 User’s Guide.
Go to “Boot Problems/Concerns” on page 155.
Chapter 5. Error Code to FRU Index 215

IBM P 615 series Specifications

General

Brand	IBM
Model	P 615 series
Category	Server
Language	English