IBM P 615 series - PCI-X Slot Locations (Model 6 C3 and Model 6 E3)

PCI-X Slot Locations (Model 6C3 and Model 6E3)
Six PCI-X slots are available. Slots 1, 4, 5, and 6 are 64-bit capable at 133 MHz, 3.3 volts. Slots 2 and 3
are 32-bit capable at 66 MHz, 3.3 volts. All slots have hot-swap capabilities. The slots are numbered on
the rear of the chassis from left to right, 1 through 6.
All PCI-X slots are capable of running either 64-bit or 32-bit adapters. However, a 32-bit adapter operates
in a 32-bit mode and shows no performance advantage while running in a 64-bit slot. The following
illustration shows the PCI adapter slot locations when viewing from the rear of the system.
1
2
3
6
5
4
1 PCI-X Slot 1 4 PCI-X Slot 4
2 PCI-X Slot 2 5 PCI-X Slot 5
3 PCI-X Slot 3 6 PCI-X Slot 6
16 EserverpSeries 615 Service Guide