IBM P 615 series User Manual

a. Check the modem, modem cable, and serial port for loose or unconnected cables. Reset the
service processor using the pinhole reset switch on the system’s operator panel.
b. If the hang repeats, check with service support to see if there is a firmware update that fixes the
problem.
c. If there is not, or the update does not fix the problem, replace the following FRUs, one at a time, in
the following order:
1) Modem cable
2) Modem
d.
If this procedure does not fix the problem, call service support.
Chapter 4. Checkpoints 139

IBM P 615 series Specifications

General

Brand	IBM
Model	P 615 series
Category	Server
Language	English