IBM P 615 series

9. Replace the fan tray assembly as described in “Fan Tray Assembly” on page 321
10. Reconnect the power source to the system.
11. Replace the service access cover as described in “Covers” on page 288.
12. Return the system to the operating position as described in “Returning the Model 6C3 to the
Operating Position” on page 285 or “Placing the Model 6E3 into the Service and Operating Position”
on page 286.
13. Start the system as described in “Starting the System” on page 283.
Chapter 9. Removal and Replacement Procedures 341