IBM P 615 series

Symptom Action
The system stopped. A POST indicator is displayed on
the system console and an eight-digit error code is not
displayed.
If the POST indicator represents:
1. Memory, go to “MAP 1240: Memory Problem
Resolution” on page 69.
2. Keyboard
a. Replace the keyboard.
b. Replace the service processor, location:
U0.1-P1-X1. (See notes on page 53).
c. Go to “MAP 1548: Processor Subsystem Problem
Isolation” on page 113.
3.
Network, go to “MAP 1548: Processor Subsystem
Problem Isolation” on page 113.
4. SCSI, go to “MAP 1548: Processor Subsystem
Problem Isolation” on page 113.
5. Speaker
a. Replace the operator panel, location: U0.1-L1.
Refer to “Operator Panel and Power Cable” on
page 342.
b. Replace the service processor, location:
U0.1-P1-X1. (See notes on page 53).
c. Go to “MAP 1548: Processor Subsystem Problem
Isolation” on page 113.
66 EserverpSeries 615 Service Guide