EasyManuals Logo
Home>IBM>Server>S85 pSeries 680

IBM S85 pSeries 680 User Manual

IBM S85 pSeries 680
691 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #163 background imageLoading...
Page #163 background image
Table 2. Service processor Checkpoints (continued)
Checkpoint Description Action/ Possible Failing FRU
E043 Configuring modem on serial port 2 1. Modem.
2. Service processor card.
Location: U0.1-P1-X1
3. I/O planar in primary drawer.
Location: U0.1-P1
4. Go to Entry MAP on page 79.
E04F Modem configuration successful Re-IPL. Read progress indicators
from last system boot to learn which
process had requested modem
configuration. The service processor
(now hung) has returned to that
process. Check the service
processor and AIX error logs.
E070 Service processor is calling the
service center
Be patient while the call is in
progress. If hung at this checkpoint,
check the modem, telephone
system, and service center. Check
the service processor and AIX error
logs.
E071 Service processor is calling system
administration
Be patient while the call is in
progress. If hung at this checkpoint,
check the modem, telephone
system, and system administration.
Check the service processor and AIX
error logs.
E072 Service processor is calling the
pager
Be patient while the call is in
progress. If hung at this checkpoint,
check the modem and the telephone
system. Check the service processor
and AIX error logs.
E075 Entering service processor menus
Note: Before replacing any parts,
ensure the S1 and S2 ports either
have no cables attached or the
cables are only attached to TTY or
modem devices. These ports/cables
should not be attached to another
system or drawer.
1. Exit service processor menus
2. Service processor card.
Location: U0.1-P1-X1
3. I/O planar in primary drawer.
Location: U0.1-P1
4. Go to Entry MAP on page 79.
E07A Waiting for keystroke from local
console
1. Press a key
2. Wait a few seconds for timeout
E07B Waiting for keystroke from remote
console
1. Press a key
2. Wait a few seconds for timeout
E07F Service processor exiting from
session with local or remote
terminal.
E080 Service processor flash update in
progress
Be patient. If hung at this
checkpoint, check the service
processor and AIX error logs.
Chapter 4. Checkpoints
141

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM S85 pSeries 680 and is the answer not in the manual?

IBM S85 pSeries 680 Specifications

General IconGeneral
BrandIBM
ModelS85 pSeries 680
CategoryServer
LanguageEnglish

Related product manuals