Basic Configuration with H50 and H70 Sharing the I/O Rack
The I/O rack can also have other system drawers installed. The following illustrations
show configurations that allow systems drawers to be installed in the I/O rack along
with primary and secondary I/O drawers.
Primary I/O Drawer in Top Position
Note: Ensure that the cables from the I/O drawer are tied to the sides of the rack to
enable servicing of the system installed under the I/O drawers.
Follow the installation instructions for each system when the I/O rack is shared between
two system configuration types.
First System with Primary I/O Drawer
Installed in Top Position of the
I/O Rack
Second System Drawer
Installed Under Primary
I/O Drawer
Disk Drive Drawer
Installed Under Second
System Drawer
10 Service Guide
To Next Page
Loading...
