Table 5. Firmware Error Codes. (continued)
Error Code Description Action/ Possible Failing FRU
25A80100 NVRAM data validation check failed. Turn off, turn on system unit and retry
the operation before replacing any
system component.
Refer to Action under error code
25A80xxx.
25A80201 Unable to expand target partition -
Saving configuration variable.
Refer to Action under error code
25A80xxx.
25A80202 Unable to expand target partition -
Writing error log entry.
Refer to Action under error code
25A80xxx.
25A80203 Unable to expand target partition -
Writing VPD data.
Refer to Action under error code
25A80xxx.
25A80210 Setenv/$Setenv parameter error - name
contains a null character.
Refer to Action under error code
25A80xxx.
25A80211 Setenv/$Setenv parameter error - value
contains a null character.
Refer to Action under error code
25A80xxx.
166 Service Guide
To Next Page
Loading...
