Reference Code Description/Action
Perform all actions before exchanging Failing Items
Failing Item
65A9 PCI error detected
An adapter card at the specified location is faulty.
Probability is low.
Drawer 2, Slot 9
Location: U0.3-P1-I9
1. Remove any adapters from slots
9 and 10, and retry. If failure no
longer occurs:
a. If only one adapter was
inserted in slots 9 and 10:
1) Replace the adapter and
retry.
2) Replace the I/O planar
and retry.
b. If two adapters were inserted
in slots 9 and 10:
1) Retry each adapter
individually in its original
slot. If every adapter
causes a failure then
replace the I/O planar and
retry.
2) If only one adapter causes
a failure then replace the
failing adapter and retry.
3) If replacing the adapter
does not fix the problem,
replace the I/O planar.
2. Go to “MAP 1540: Minimum
Configuration” on page 117.
B4xx
420
Service Guide
To Next Page
Loading...
