Table 18. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
40000073-00000000 The maximum
power cap value
changed from [arg1]
watts to [arg2] watts.
Info Maximum Power
Cap value changed
No action; information only.
40000074-00000000 The soft minimum
power cap value
changed from [arg1]
watts to [arg2] watts.
Info Soft Minimum
Power Cap value
changed.
No action; information only.
40000075-00000000 The measured power
value exceeded the
power cap value.
Warning Power exceeded
cap.
No action; information only.
40000076-00000000 The new minimum
power cap value
exceeded the power
cap value.
Warning Minimum Power
Cap exceeds Power
Cap.
No action; information only.
40000077-00000000 Power capping was
activated by user
[arg1].
Info Power capping
activated by user.
No action; information only.
40000078-00000000 Power capping was
deactivated by user
[arg1].
Info Power capping
deactivated by
user.
No action; information only.
40000079-00000000 Static Power Savings
mode has been
turned on by user
[arg1].
Info Static Power
Savings mode
turned on by user.
No action; information only.
4000007a-00000000 Static Power Savings
mode has been
turned off by user
[arg1].
Info Static Power
Savings mode
turned off by user.
No action; information only.
4000007b-00000000 Dynamic Power
Savings mode has
been turned on by
user [arg1].
Info Dynamic Power
Savings mode
turned on by user.
No action; information only.
4000007c-00000000 Dynamic Power
Savings mode has
been turned off by
user [arg1].
Info Dynamic Power
Savings mode
turned off by user.
No action; information only.
4000007d-00000000 Power cap and
external throttling
occurred.
Info Power cap and
external throttling
occurred.
No action; information only.
4000007e-00000000 External throttling
occurred.
Info External throttling
occurred.
No action; information only.
4000007f-00000000 Power cap throttling
occurred.
Info Power cap
throttling occurred.
No action; information only.
40000080-00000000 Remote Control
session started by
user [arg1] in [arg2]
mode.
Info Remote Control
session started
No action; information only.
226 System x3300 M4 Type 7382: Installation and Service Guide