IBM System x3300 M4 User Manual

Table 14. Network adapters (continued)
Network Adapters
Description
Option part
number
CRU part
number
Intel PRO/1000 PF server adapter 42C1750 42C1752
NetXtreme II 1000 express dual-port Ethernet adapter 42C1780 49Y7947
QLogic 10Gb CNA 42C1800 42C1802
Brocade 10Gb dual-port CNA 42C1820 42C1822
Emulex 4 Gbps FC single-port PCIe HBA 42C2069 43W7510
Emulex 4Gbps FC dual-port PCIe HBA 42C2071 43W7512
Emulex 8Gb FC single-port HBA 42D0485 42D0491
Emulex 8Gb FC dual-port HBA 42D0494 42D0500
QLogic 8Gb FC single-port HBA 42D0501 42D0507
QLogic 8Gb FC dual-port HBA 42D0510 42D0516
IBM 6Gb SAS HBA Controller 46M0907 68Y7354
Brocade 8Gb FC single-port HBA 46M6049 46M6061
Brocade 8Gb FC dual-port HBA 46M6050 46M6062
NetXtreme II 1000 express quad-port Ethernet adapter 49Y4220 49Y7949
Intel Ethernet dual-port server adapter I340-T2 49Y4230 49Y4232
Intel Ethernet quad-port server adapter I340-T4 49Y4240 49Y4242
Broadcom NetXtreme II dual-port 10GBaseT adapter 49Y7910 49Y7912
Intel X520-DA2 dual-port 10GbE SFP adapter 49Y7960 49Y7962
Brocade 4Gb FC single-port HBA 59Y1987 59Y1992
Brocade 4Gb FC dual-port HBA 59Y1993 59Y1998
Broadcom NetXtreme I quad-port GbE adapter 90Y9352 90Y9355
Broadcom NetXtreme I dual-port GbE adapter 90Y9370 90Y9373
Emulex 10 GbE virtual fabric adapter III 95Y3762 9573766
Emulex 10 GbE virtual fabric adapter III lite 95Y3768 95Y3766
v Depending on your server models, the server comes with an onboard RAID
controller which provides basic RAID levels 0 and 1 functionality. The server
supports the following optional RAID adapters that you can purchase for
additional RAID support. For configuration information, see the documentation
that comes with the adapter or the ServeRAID documentation at
http://www.ibm.com/supportportal/.
Attention: Some cluster solutions require specific code levels or coordinated
code updates. If the device is part of a cluster solution, verify that the latest level
of code is supported for the cluster solution before you update the code.
Attention: Static electricity that is released to internal server components when
the server is powered-on might cause the server to stop, which might result in the
loss of data. To avoid this potential problem, always use an electrostatic-discharge
wrist strap or other grounding system when working inside the server with the
power on.
To install an adapter, complete the following steps:
Chapter 2. Installing optional devices 81

IBM System x3300 M4 Specifications

General

Brand	IBM
Model	System x3300 M4
Category	Server
Language	English