imm_user_id
The IMM account (1 of 12 accounts). The default value is USERID.
imm_password
The IMM account password (1 of 12 accounts). The default value is
PASSW0RD (with a zero 0 not an O).
The following commands are examples of using the userid and password
default values and not using the default values:
Examples that do not use the userid and password default values:
asu set SYSTEM_PROD_DATA.SYsInfoProdName <m/t_model> --host <imm_ip>
--user <imm_user_id> --password <imm_password>
asu set SYSTEM_PROD_DATA.SYsInfoSerialNum <s/n> --host <imm_ip>
--user <imm_user_id> --password <imm_password>
asu
set
SYSTEM_PROD_DATA.SYsEncloseAssetTag
<asset_tag>
--host <imm_ip> --user <imm_user_id> --password <imm_password>
Examples that do use the userid and password default values:
asu set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> --host <imm_ip>
asu set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> --host <imm_ip>
asu
set
SYSTEM_PROD_DATA.SysEncloseAssetTag
<asset_tag>
--host <imm_ip>
v Bootable media:
You can also build a bootable media using the applications available through
the ToolsCenter Web site at http://www.ibm.com/support/entry/portal/
docdisplay?brand=5000008&lndocid=TOOL-CENTER. From the IBM
ToolsCenter page, scroll down for the available tools.
5. Restart the server.
Chapter 3. Configuration information and instructions 147
To Next Page
Loading...
Need help?
General