Installing an adapter
The following notes describe the types of adapters that the server supports and
other information that you must consider when you install an adapter:
v To confirm that the server supports the adapter that you are installing, see
http://www.ibm.com/systems/info/x86servers/serverproven/compat/us/.
v Locate the documentation that comes with the adapter and follow those
instructions in addition to the instructions in this section.
v The server does not support any high-definition video-out connector or stereo
connector on any add-on video adapter.
v The server does not support PCI-X adapters or legacy 5 V PCI adapters.
v Disconnect the power cords from the power source before you remove or install
any adapter or riser card.
v The server supports two optional Ethernet adapters that you can purchase: the
IBM dual-port 10Gb SFP (fiber) Ethernet adapter and the IBM dual-port 10Gb-T
(copper) Ethernet adapter. For more information, see Table 16 on page 68).
66 System x3750 M4 Types 8722 and 8733: Installation and Service Guide
To Next Page
Loading...
Need help?
General