Important: Perform the following updates:
v Either update the server with the latest RAID firmware or restore the
pre-existing firmware from a CD or DVD image.
v Update the UUID (see “Updating the Universal Unique Identifier (UUID)” on
page 142).
v Update the DMI/SMBIOS (see “Updating the DMI/SMBIOS data” on page 144).
Internal cable routing
This section provides information about routing the cables when you install some
components in the server.
For more information about the requirements for cables and connecting devices,
see the documentation that comes with these devices.
Cabling the CD/DVD drive:
Cabling the SAS signal cables to the adapter and the backplane:
Chapter 6. Removing and replacing components 285
To Next Page
Loading...
