IBM System x3750 M4 Type 8722 - Backplane Configuration for 28 Drives; Backplane Configuration for 32 Drives

2.5” HDD/SSD
4567
2.5” HDD/SSD
2.5” HDD/SSD
2.5” HDD/SSD
2.5” HDD/SSD
0123
2.5” HDD/SSD
2.5” HDD/SSD
2.5” HDD/SSD
16 191817 20 21
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
22 23
24 272625 28 29
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
30 31
This configuration consists of three 8x1.8-inch drive backplanes and requires six
SAS signal cables.
Backplane configuration for 28 drives
The following illustration shows the supported backplane configuration to support
28 drives.
This configuration consists of one 4x2.5-inch drive backplane and three
8x1.8-inch drive backplanes and requires seven SAS signal cables.
Backplane configuration for 32 drives
The following illustration shows the supported backplane configuration to support
32 drives.
This configuration consists of four 8x1.8-inch drive backplanes and requires
eight SAS signal cables.
1.8” SSD 1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
8 9 10 11 2120 22 23
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1312 14 15 1716 18 19
1.8” SSD 1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
0123 5467 2928 30 31
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
2524 26 27
60 System x3750 M4 Types 8722 and 8733: Installation and Service Guide