4000000f-00000000 Attempting to [arg1] server [arg2] by user [arg3].
Explanation: This message is for the use case where a user is using the Management Controller to perform a power
function on the system.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0015
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000010-00000000 Security: Userid: [arg1] had [arg2] login failures from WEB client at IP address [arg3].
Explanation: A user has exceeded the maximum allowed number of unsuccessful login attempts from a web
browser and has been prevented from logging in for the lockout period.
Severity: Warning
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0016
SNMP Trap ID: 30
Automatically notify Support: No
User response: Complete the following steps until the problem is solved:
1. Make sure that the correct login ID and password are being used.
2. Have the system administrator reset the login ID or password.
40000011-00000000 Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3].
Explanation: A user has exceeded the maximum allowed number of unsuccessful login attempts from the
command-line interface and has been prevented from logging in for the lockout period.
Severity: Warning
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0017
SNMP Trap ID: 30
Automatically notify Support: No
User response: Complete the following steps until the problem is solved:
1. Make sure that the correct login ID and password are being used.
2. Have the system administrator reset the login ID or password.
4000000f-00000000 • 40000011-00000000
Appendix D. Integrated management module II (IMM2) error messages 355
To Next Page
Loading...
Need help?
General