40000021-00000000 Management Controller [arg1] clock has been set from NTP server [arg2].
Explanation: The IMM clock has been set to the date and time that are provided by the Network Time Protocol
server.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0033
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000022-00000000 SSL data in the Management Controller [arg1] configuration data is invalid. Clearing
configuration data region and disabling SSL.
Explanation: There is a problem with the certificate that has been imported into the IMM. The imported certificate
must contain a public key that corresponds to the key pair that was previously generated through the “Generate a
New Key and Certificate Signing Request ” link.
Severity: Error
Alert Category: System - other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0034
SNMP Trap ID: 22
Automatically notify Support: No
User response: Complete the following steps until the problem is solved:
1. Make sure that the certificate that you are importing is correct.
2. Try to import the certificate again.
40000023-00000000 Flash of [arg1] from [arg2] succeeded for user [arg3] .
Explanation: The specified firmware update has been completed.
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0035
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000021-00000000 • 40000023-00000000
Appendix D. Integrated management module II (IMM2) error messages 361
To Next Page
Loading...
Need help?
General