816f040c-2581ffff [PhysicalMemoryElementName] Enabled on Subsystem [MemoryElementName].
Explanation: IMM has detected that Memory has been Enabled.
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0130
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
816f0507-0301ffff [ProcessorElementName] has Recovered from a Configuration Mismatch.
Explanation: Processor 1 has Recovered from a Processor Configuration Mismatch.
Severity: Info
Alert Category: Critical - CPU
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0063
SNMP Trap ID: 40
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
816f0507-0302ffff [ProcessorElementName] has Recovered from a Configuration Mismatch.
Explanation: Processor 2 has Recovered from a Processor Configuration Mismatch.
Severity: Info
Alert Category: Critical - CPU
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0063
SNMP Trap ID: 40
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
816f040c-2581ffff • 816f0507-0302ffff
Appendix D. Integrated management module II (IMM2) error messages 613
To Next Page
Loading...
