Using the Enhanced Video/MPEG Functions
Note:
The Video CD Player program
cannot play some video CDs. If you
cannot play your video CD, click on
the Digital Video 3 icon instead;
then follow the instructions on the
screen.
When you want to play a video CDs or CD-i movies from the
CD-ROM drive of your computer,
select the Video CD Player
icon.
MPEG under WIN-OS/2
WIN-OS/2 does not support the playing of MPEG files.
When you select IBM MPEG-2, MPEG Video, or CD-i/VideoCD
in the Device Driver folder of Media Player, the following error
message might appear:
IBM MPEG: This driver can NOT be loaded under Win-OS2
When you click on Video CD Player, the following error
message appears:
Win32s Error ...
Ignore any error messages; then click on OK to exit the error
message screen.
The following shows considerations when using the MPEG playback
in OS/2 Warp:
When you run other tasks while an MPEG file is being played,
the MPEG file image might be distorted temporarily.
The bar displaying the running time for the video CD might not
be exact.
You cannot play two MPEG files at the same time. Also, you
cannot play the MPEG file while using the video-in function. If
you try to do this, the following error message is displayed:
Unable to open device 'IBM MPEG-enh Vid 3', use the
Multimedia Set up program to ensure that the file
is associated to a MMPM/2 device.
Using the Video-in (Video Capture and Video Overlay) for OS/2
You can capture still images or motion video using video capture
application Video IN supported by MMPM/2, and the video-in port of
the computer.
Chapter 3. Operating Your Computer 67
To Next Page
Loading...
Need help?
General