Chapter 4. Infrastructure planning 109
• Maximum configuration: 1.7 kVA
BTU output:
– Minimum configuration: 546 Btu/hr (160 watts)
– Maximum configuration: 10,912 Btu/hr (3,200 watts)
Noise level:
– 6.6 bels (operating)
– 6.4 bels (idle)
4.2 Rack selection and rack options
The server supports the rack cabinets listed in Table 4-1.
Table 4-1 Rack cabinets
Full-length I/O Book: As indicated, some racks are not deep enough to support the
servers with Full-length I/O Books installed.
Part
number
Description Supported Maximum supported
x3850 X6 x3950 X6
2018-86X IBM 11U Office Enablement Kit No Not applicable
9307-2PX IBM 25U Static S2 Standard Rack No Not applicable
9307-2RX IBM 25U Standard Rack No Not applicable
9307-4RX IBM 42U Standard Rack No Not applicable
9307-4XX IBM 42U Standard Rack Extension No Not applicable
9308-4EX IBM 42U Enterprise Expansion Rack
Ye s
a
10 5
9308-4PX IBM 42U Enterprise Rack
Ye s
a
10 5
9360-4PX IBM 42U 1200mm Deep Dynamic Rack
Ye s 1 0 5
9360-4EX IBM 42U 1200mm Deep Dynamic Expansion Rack
Ye s 1 0 5
9361-4PX IBM 42U 1200mm Deep Static Rack
Ye s 1 0 5
9361-4EX IBM 42U 1200mm Deep Static Expansion Rack
Ye s 1 0 5
9362-4PX IBM 47U 1200mm Deep Static Rack
Ye s 1 1 5
9362-4EX IBM 47U 1200mm Deep Static Expansion Rack
Ye s 1 1 5
9363-4CX IBM PureFlex® System 42U Rack
Ye s 1 0 5
9363-4DX IBM PureFlex System 42U Expansion Rack
Ye s 1 0 5
9363-4PX IBM 42U 1100mm Dynamic Rack
Ye s 1 0 5
9363-4EX IBM 42U 1100mm Dynamic Expansion Rack
Ye s 1 0 5
1410-2RX Intelligent Cluster™ 25U Rack Family No Not applicable
1410-4RX Intelligent Cluster 42U Rack Family
Ye s
a
10 5
1410-PRA Intelligent Cluster 42U 1200mm Deep Rack Family
Ye s 1 0 5