IBM X3850 X6 User Manual

62 IBM System x3850 X6 and x3950 X6 Planning and Implementation Guide
The LCD system information display panel displays the following types of information about
the server:
򐂰 IMM system error log
򐂰 System VPD information:
– Machine type and serial number
– Universal Unique Identifier (UUID) string
򐂰 System firmware levels:
– UEFI code level
– IMM code level
– pDSA code level
򐂰 IMM network information:
– IMM hostname
– IMM dedicated MAC address. Only the MAC address that is currently in use is
displayed (dedicated or shared)
– IMM shared MAC address
– IP v4 information
– IP v6 address
򐂰 System environmental information:
– Ambient temperature
– CPU temperature
– AC input voltage
– Estimated power consumption
3.5.3 Rear ports and LEDs
Figure 3-10 shows the ports and LEDs located on the rear of the server.
Figure 3-10 Rear ports and LEDs
Fan-pack 9 Fan-pack 10
NMI
button
Serial port USB 2.0
connectors
Systems
management
ethernet port
3V battery
error LED
I/O board
error LED
Locate LED
System
power LED
System
error LED
VGA video
connector

IBM X3850 X6 Specifications

General

Chipset	Intel C602J
Network Controller	Integrated quad-port Gigabit Ethernet
Processor	Up to four Intel Xeon E7-4800 v2 series processors or Intel Xeon E7-8800 v2 series processors
Memory	Up to 6 TB of DDR3 ECC Registered DIMMs (RDIMMs) or Load-Reduced DIMMs (LRDIMMs)
Form Factor	4U rack server
Storage	Up to 24x 2.5" hot-swap SAS/SATA HDDs or SSDs
Expansion Slots	Up to 11 PCIe 3.0 slots
Power Supply	Up to four 1400W or 900W hot-swap power supplies
Memory Type	DDR3 RDIMM/LRDIMM
Storage Controller	ServeRAID M5210 SAS/SATA controller
RAID Support	RAID 0, 1, 5, 6, 10, 50, 60
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware