146
17
CONTROL COMMAND
17
CW: Clockwise, CCW: Counter Clockwise
• Command table (continued)
1A 050036 Send/read opening message
(0=OFF, 1=ON)
050037 Send/read my call sign setting (10
character: see p. 149 )
050038 Send/read power ON check
(0=OFF, 1=ON)
050039 Send/read current year (2000 to
2099)
050040 Send/read current date (0101 to
1231=Jan. 1st to Dec. 31st)
050041 Send/read current time (0000 to
2359=00:00 to 23:59)
050042 Send/read clock2 function (0=OFF,
1=ON)
050043 Send/read offset time for clock2
function (24001 to 24000=–24:00
to +24:00)
050044 Send/read auto power OFF period
(0=OFF, 1=30 min., 2=60 min.,
3=90 min.)
050045 Send/read TX monitor set
(0=OFF, 1=ON)
050046 Send/read TX monitor gain
(0=0% to 255=100%)
050047 Send/read confirmation beep
(0=OFF, 1=ON)
050048 Send/read band edge beep
(0=OFF, 1=ON)
050049 Send/read beep gain (0=min. to
255=max.)
050050 Send/read beep gain limit (0=OFF,
1=ON)
050051 Send/read RF/SQL control set
(0=Auto, 1=SQL, 2=RF+SQL)
050052 Send/read quick split set (0=OFF,
1=ON)
050053 Send/read split offset –9.999 to
+9.999 MHz (see p. 149 for de-
tails)
050054 Send/read split lock set (0=OFF,
1=ON)
050055 Send/read duplex offset 0.000 to
9.999 MHz for HF (see p. 149 for
details)
050056 Send/read duplex offset 0.000 to
9.999 MHz for 50 MHz band (see
p. 149 for details)
050057 Send/read duplex offset 0.000 to
9.999 MHz for 144 MHz band
(see p. 149 for details)
050058 Send/read duplex offset 0.000 to
9.999 MHz for 430 MHz band
(see p. 149 for details)
050059 Send/read one touch repeater set
(0=DUP–, 1=DUP+)
050060 Send/read auto repeater set
(0=OFF, 1=ON-1, 2=ON-2)
050061 Send/read tuner auto start set
(0=OFF, 1=ON)
050062 Send/read PTT tune set (0=OFF,
1=ON)
1A 050007 Send/read of SSB TX bandwidth
(lower edge) for narrow
(0=100, 1=200, 2=300, 3=500 HZ)
050008 Send/read of SSB TX bandwidth
(higher edge) for narrow (0=2500,
1=2700, 2=2800, 3=2900 HZ)
050009 Twin Peak Filter (0=OFF; 1=ON)
050010 Send/read RTTY mark frequency
(0=1275 Hz, 1=1615 Hz,
2=2125 Hz)
050011 Send/read RTTY shift width
(0=170 Hz, 1=200 Hz, 2=425 Hz)
050012 Send/read RTTY keying polarity
(0=Normal, 1=Reverse)
050013 Send/read CW key speed (0=0.6
WPM to 255=60 WPM)
050014 Send/read CW Pitch setting
(0=300 Hz, 120=900 Hz, in 5 Hz
steps)
050015 Send/read CW side tone level
(0=min. to 255=max.)
050016 Send/read CW side tone level limit
(0=OFF, 1=ON)
050017 Send/read LCD contrast (0=0% to
255=100%)
050018 Send/read LCD bright (0=0%,
255=100%)
050019 Send/read LCD unit bright (0=0%
to 255=100%)
050020 Send/read LCD flicker level (0=0%
to 255=100%)
050021 Send/read switch backlight (0=0%
to 255=100%)
050022 Send/read display type (0=A, 1=B,
2=C)
050023 Send/read display font type
(0=Basic, 1=Italic)
050024 Send/read display font size
(0=Normal, 1=Large)
050025 Send/read meter peak hold
(0=OFF, 1=ON)
050026 Send/read filter pop up indication
for PBT shifting (0=OFF, 1=ON)
050027 Send/read filter pop up indication
for IF filter setting (0=OFF, 1=ON)
050028 Send/read pop up indication for 1
Hz mode (0=OFF, 1=ON)
050029 Send/read pop up indication for
scope center/fix (0=OFF, 1=ON)
050030 Send/read TV pop up indication for
channel Up/Down (0=OFF, 1=ON)
050031 Send/read TV pop up indication for
P.AMP/ATT (0=OFF, 1=ON)
050032 Send/read indication of the voice
TX memory channel names
(0=OFF, 1=ON)
050033 Send/read indication of the keyer
memory names (0=OFF, 1=ON)
050034 Send/read indication of the DTMF
memory names (0=OFF, 1=ON)
050035 Send/read external display setting
(0=1:1.8, 1=1:1.6)
Command Sub command Description Command Sub command Description
To Next Page
Loading...
