92
17
OPTIONS
BP-228 Ni-Cd BATTERY PACK (9.6 V, 2800 mAh)
Provides outdoor operation (max. output power 5 W).
OPC-1248 DC POWER ADAPTOR CABLE
Provides to connect PS-125. Connects 3-pin DC cable (OPC-1229) to 6-pin connector.
MB-65 MOUNTING BASE
Allows you to conveniently vehicle-mount
the front panel of the IC-703. An MB-63
must be used in combination with the MB-
65.
OPC-598 ACC 13-PIN CABLE
Required when using the AT-180.
MB-72 CARRYING HANDLE
Convenient when carrying the transceiver.
OPC-581/587
SEPARATION CABLE
Provide front panel detached operation for
mobile installations or compact transceiver
operation.
• OPC-581: 3.5 m (11.5 ft)
• OPC-587: 5 m (16.4 ft)
OPC-589
MICROPHONE ADAPTOR CABLE
Conversion between 8-pin modular and 8-
pin metal connector for using a desktop mi-
crophone with the IC-703.
OPC-599 ADAPTOR CABLE
13-pin, ACC connector to 7-pin + 8-pin ACC
connector.
PS-125 DC POWER SUPPLY
Light weight switching regulator power sup-
ply. The OPC-1248 is necessary to use this
power supply.
• Output voltage: 13.8 V
• Max. current drain: 25 A
UT-106 DSP RECEIVER
Provides AF DSP functions such as noise
reduction and auto notch.
Built-in to some versions.
LC-156
MULTI-BAG (with controller case)
17
To Next Page
Loading...
