58
7
MEMORY OPERATION
Any unnecessary memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
q Select M2 functions.
• Push [DISPLAY] once or twice to select M.
• Push [MENU] one or more times to select M2.
w Push [
(F-3)
V/M] to select memory mode.
e Rotate [M-CH] to select a memory channel to be
cleared.
r Push [
(F-2)
MCL] for 1 sec. to clear the contents.
•The programmed frequency and operating mode dis-
appear and “}” appears.
t To return to VFO mode, push [(F-3)V/M] again.
■ Memory clearing
■ Frequency transferring
The frequency and operating mode can be trans-
ferred from memory mode to VFO mode.
q Select M2 functions.
• Push [DISPLAY] once or twice to select M.
• Push [MENU] one or more times to select M2.
w Select VFO mode with [(F-3)V/M].
e Select a memory channel with [M-CH].
•Select memory mode to confirm the memory channel’s
contents, if desired; then return to VFO mode.
•“}” appears if the selected memory channel is a
blank channel (and does not have contents). In this
case transferring is not possible.
r Push [
(F-3)
V/M] for 1 sec. to transfer the frequency
and operating mode.
•Transferred frequency and operating mode appear in
the display.
V/M
F-3
SPLIT
Push for
1 sec.
[EXAMPLE]: Transferring contents of memory 16.
Operating frequency: 21.320 MHz/USB (VFO)
Contents of memory 16: 14.020 MHz/CW
CH
VFO A
USB
CH
VFO A
USB
CH
VFO A
CW
M-CH SHIFT
To Next Page
Loading...
