Icom IC-910H - User Manual

INSTRUCTION MANUAL
VHF/UHF
ALL MODE TRANSCEIVER
i910H

Summary

Panel Description

Front Panel Controls - Basic Operations

Covers power, transmit, signal processing, audio, and RF power controls on the front panel.

Front Panel Controls - Tuning and Memory Access

Front Panel Controls - Frequency and Satellite

Installation and Connections

Initial Setup and Antenna Considerations

Covers unpacking, grounding, location selection, and antenna connection.

Front Panel and Data Connections

Power Supply Connections

Guides on connecting DC power supply and vehicle battery.

Basic Operation

Initial Settings and CPU Reset

Covers initial settings after reset and the CPU reset procedure.

Band and VFO Operation

Explains MAIN/SUB bands, accessing SUB band, VFO operation, and band selection.

Frequency and Mode Settings

Details frequency setting, tuning steps, keypad entry, and mode selection.

Receive and Transmit

Basic Receive Functions

Explains volume, squelch, RIT, IF shift, AGC, AFC, and FM center indicator.

Advanced Receive Features

Transmit Functions and Indicators

Mode-Specific Operations

Details FM, VOX, Repeater, SSB, Split, Duplex, and CW operations.

Satellite Operation

Satellite Communications Basics

Satellite Operation and Memory

Covers tracking selection, satellite memory, preparation, loop tests, and operation procedures.

Data Communication

AFSK Functions and Connections

Details AFSK functions, connections, operating notes, and ACC socket settings.

Option Installations

Installing Optional Units

Guides on installing UT-102, UT-106 DSP, UX-910, CR-293, and FL-132/FL-133.

Maintenance

Troubleshooting Guide

Provides a chart for diagnosing and solving common problems.

Fuse Replacement and CPU Reset

Icom IC-910H Specifications

General

Brand	Icom
Model	IC-910H
Category	Transceiver
Language	English