38
8
DSC OPERATION
New2001
■ Sending a Non-Distress call (Continued)
When you select a coast station
in step 3, the voice channel is
automatically specied by the coast
station. Therefore, skip steps 4 and 5,
and go to step 6.
4. Select “Channel,” then push [ENT].
5. Select the voice channel,
then push [ENT].
6.
Push [Call]
to s
end the
Individual call.
Push
NOTE:
After receiving the acknowledgement:
• The voice channel specied in step 5 is
selected.
• A different voice channel is selected if the
station you called cannot use the channel.
7. After sending, the following screen
is displayed.
L See page 29 or page 30 for
details of the Task mode’s Software
key functions.
8. When the acknowledgement is
received:
• Alarm sounds.
• The following screen is displayed.
(Example: ACK (Able))
9. Push any [Alarm Off] .
10. Push any [Close Call RCVD
Window]
.
When you receive “ACK (Unable)” in
step 8, skip step 11, and go to step 12.
11. Hold down [PTT] to communicate.
12. Push [Standby]
to return to
the Main screen.
+
Push
Rotate
To Next Page
Loading...
