39
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
When receiving an Individual call, you
can send an acknowledgement (‘Able,’
‘Unable,’ or ‘New CH’) by using the on-
screen prompts.
1. When an Individual call is received:
• Alarm sounds.
• The following screen is displayed.
2. Push any [Alarm Off] .
3. Push [Accept]
.
Push
• Enters the DSC Task mode.
4. Select your action.
[ACK (Able)]:
Sends an acknowledgment without any
changes.
[ACK (Unable)]:
Sends an acknowledgment, but you
cannot make a communication.
[ACK (New CH)]:
Sends an acknowledgment. You can
specify the Voice Communication
channel.
5.
Push [Call]
to s
end the
Individual acknowledgement.
When you push [ACK (Unable)] in step
5, skip step 7, and go to step 8.
6. Hold down [PTT] to communicate.
7. Push [Standby]
to return to
the Main screen.
D Sending an Individual acknowledgement
To Next Page
Loading...
