33
DSC OPERATION
7
7
While waiting for Distress ACK
1. When “Waiting for Distress ACK” is displayed,
push
.
L See pages 27 and 28 for details of the Software Key
functions in the DSC Task mode.
2. Push to send the Distress Cancel call.
• The Distress cancel is sent.
L The frequencies that you have to send voice cancel
messages are displayed.
(Example: 2/4/6/8/12/16 MHz)
L To cancel the Distress Cancel call, push
.
3. After sending, the following screen is displayed.
Push .
4. Select a frequency to send a voice cancel message.
L The check mark shows that the Distress call on the
selected frequency is cancelled by sending Voice
Cancel message.
5. Hold down [PTT] to report the purpose of the
cancellation.
L You can display the wording of the cancellation by
rotating [CH/GRP], or pushing [▲] or [▼].
6. Repeat steps 3 to 5 to cancel on all frequencies.
7. After sending a voice cancel message on all
frequencies, is displayed.
Push .
8. Push , and then to return to
the Main screen.
+
Push
Rotate
To Next Page
Loading...
