IDEC MICRO/I HG1G-4VT22TF Series User Manual

5 User Communication
3-20 WindO/I-NV4 User’s Manual
31 Configure all commands, click OK.
This concludes configuring user communication to use Transmission (TXD) and Receive (RXD) commands.
To set the created user communication protocol to another user communication or to use it in another
project, click Copy to Protocol Manager to register it in Protocol Manager. For details on the Protocol
Manager, refer to “5.3 Protocol Manager” on page 3-32.

IDEC MICRO/I HG1G-4VT22TF Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1G-4VT22TF Series
Category	Control Panel
Language	English