IDEC MICRO/I HG1G-4VT22TF Series User Manual

WindO/I-NV4 User’s Manual 3-21
5 User Communication
3
Communication
Using Inching Function
1 On the Configuration tab, in the System Setup group, click Project.
The Project Settings dialog box is displayed.
2 Click the Communication Interface Tab in the Project Settings dialog box.
3 Select the interface for user communication under Interface Configuration, and then select the User
Communication 1
*1
in Function under Interface Settings.
*1 Inching function can be configured only for User Communication 1.
HG3G HG2G-5FHG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T HG4G HG1G HG1P

IDEC MICRO/I HG1G-4VT22TF Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1G-4VT22TF Series
Category	Control Panel
Language	English