1 Communicating with the MICRO/I
24-10 WindO/I-NV4 User’s Manual
To execute any function except project data download
The Target IP Address dialog box will be displayed when any of the following functions are executed.
• Upload a project data.
• Upload data from an external memory device inserted in the MICRO/I.
• Delete data stored in the internal memory.
• Delete data from or formatting an external memory device inserted in the MICRO/I.
• Display information about runtime system and project data.
• Monitor the MICRO/I.
Specifies the IP address of the MICRO/I used for communication.
■ Target IP Address
Specify the IP address for the target MICRO/I to execute this function.
Click to display IP Address Manager. Specify the IP address for the target MICRO/I with IP Address Manager.
■ Target Port Number
Specify the port number for the target MICRO/I to execute this function.
To Next Page
Loading...