FC6A S
ERIES
M
ICRO
S
MART
A
LL
-
IN
-O
NE
T
YPE
U
SER
’
S
M
ANUAL
FC9Y-B1722 2-9
2: P
RODUCT
S
PECIFICATIONS
■ 24V DC Power Type
Type No.
FC6A-C16R1CE, FC6A-C16K1CE, FC6A-C16P1CE, FC6A-C24R1CE, FC6A-C24K1CE,
FC6A-C24P1CE, FC6A-C40R1CE, FC6A-C40K1CE, FC6A-C40P1CE, FC6A-C40R1CEJ,
FC6A-C40K1CEJ, FC6A-C40P1CEJ
Rated Power Voltage 24V DC
Voltage Fluctuation Range 20.4 to 28.8V DC (including ripple)
Maximum Power Consumption Standalone When Maximum Load is Connected
FC6A-C16R1CE 3.36 W (24V DC) 13.44 W (24V DC)
FC6A-C16K1CE 4.56 W (24V DC) 13.44 W (24V DC)
FC6A-C16P1CE 4.56 W (24V DC) 13.44 W (24V DC)
FC6A-C24R1CE 3.72 W (24V DC) 16.32 W (24V DC)
FC6A-C24K1CE 4.8 W (24V DC) 16.32 W (24V DC)
FC6A-C24P1CE 4.8 W (24V DC) 16.32 W (24V DC)
FC6A-C40R1CE 4.68 W (24V DC) 21.84 W (24V DC)
FC6A-C40K1CE 4.92 W (24V DC) 21.84 W (24V DC)
FC6A-C40P1CE 4.92 W (24V DC) 21.84 W (24V DC)
FC6A-C40R1CEJ 4.92 W (24V DC) 21.84 W (24V DC)
FC6A-C40K1CEJ 4.2 W (24V DC) 21.84 W (24V DC)
FC6A-C40P1CEJ 4.2 W (24V DC) 21.84 W (24V DC)
Allowable Momentary Power
Interruption
10 ms or longer (when rated power supply voltage)
Withstand Voltage
Between power and FE terminals: 500V AC, 1 minute
Between input and FE terminals: 500V AC, 1 minute
Between transistor output and FE terminals: 500V AC, 1 minute
Between relay output and FE terminals: 2,300V AC, 1 minute
Between power and input terminals: 500V AC, 1 minute
Between power and transistor output terminals: 500V AC, 1 minute
Between power and relay output terminals: 2,300V AC, 1 minute
Between input and transistor output terminals: 500V AC, 1 minute
Between input and relay output terminals: 2,300V AC, 1 minute
Insulation Resistance
Between power and FE terminals: 100 MΩ or higher (500V DC insulation resistance tester)
Between input and FE terminals: 100 MΩ or higher (500V DC insulation resistance tester)
Between transistor output and FE terminals: 100 MΩ or higher (500V DC insulation resistance
tester)
Between relay output and PE terminals: 100 MΩ or higher (500V DC insulation resistance tester)
Between power and input terminals: 100 MΩ or higher (500V DC insulation resistance tester)
Between power and transistor output terminals: 100 MΩ or higher (500V DC insulation resistance
tester)
Between power and relay output terminals: 100 MΩ or higher (500V DC insulation resistance tester)
Between input and transistor output terminals: 100 MΩ or higher (500V DC insulation resistance
tester)
Between input and relay output terminals: 100 MΩ or higher (500V DC insulation resistance tester)
Inrush Current 35 A maximum
Isolation Between power terminal and internal circuit: Transformer isolated
Ground D-type ground (Class 3 ground)
Grounding Wire See "Recommended Ferrule List" on page 3-35
Power Supply Wire See "Recommended Ferrule List" on page 3-35
Effect of Improper Power Supply
Connection
Reverse polarity: Normal operation
Improper voltage or frequency: Permanent damage may be caused
Improper lead connection: Permanent damage may be caused
To Next Page
Loading...