iDect FC6A series - Page 455

FC6A S ERIES M ICRO S MART A LL - IN -O NE T YPE U SER ’ S M ANUAL FC9Y-B1722 A-5
A PPENDIX
Option Cables (Sold Separately)
*1 The "□" in the I/O terminal type numbers indicates the terminal shape.
T: Touch-down terminal block, S: Captive screw terminal block
*2 Use the FC6A-KC1C for products other than the HG2G-5FT22TF Series.
Options (Sold Separately)
Recommended Products (Sold Separately)
Product Name Type No. Function
Shielded flat I/O cable (0.5 m [1.64 feet]) FC9Z-H050A20
Shielded, 20-pin straight cable for use with I/O modules
This can be used with IDEC I/O terminals.
The type numbers of the supported I/O terminals are shown below.
BX1D-□20A,
*1
BX1F-□20A,
*1
BX7D-BT16A1T
(16-point relay output)
Shielded flat I/O cable (1 m [3.28 feet]) FC9Z-H100A20
Shielded flat I/O cable (2 m [6.56 feet]) FC9Z-H200A20
Shielded flat I/O cable (3 m [9.84 feet]) FC9Z-H300A20
Non-shielded flat I/O cable (0.5 m [1.64 feet]) FC9Z-H050B20
Non-shielded, 20-pin straight cable for use with I/O modules
This can be used with IDEC I/O terminals.
The type numbers of the supported I/O terminals are shown below.
BX1D-□20A
*1
, BX1F-□20A
*1
, BX7D-BT16A1T
(16-point relay output)
Non-shielded flat I/O cable (1 m [3.28 feet]) FC9Z-H100B20
Non-shielded flat I/O cable (2 m [6.56 feet]) FC9Z-H200B20
Non-shielded flat I/O cable (3 m [9.84 feet]) FC9Z-H300B20
External device/O/I communication cable FC6A-KC1C
Cable for connecting external devices, IDEC displays (HG4G/3G/2G),
and general-purpose display devices (cable length: 5 m [16.4 feet])
RJ45 connector/loose wires (1 item)
O/I communication cable FC6A-KC2C
Cable dedicated for connecting IDEC displays (HG4G/3G/2G
*2
) (cable
length: 5 m [16.4 feet])
RJ45 connector/D-sub 9-pin connector (1 item)
FC6A Series expansion interface module
pluggable terminal block
FC6A-PMSB11PN02 5.08 mm pitch, 11-pin, spring clamp type (2 items)
FC6A-PMSC10PN02 3.81 mm pitch, 10-pin, spring clamp type (2 items)
FC6A-PMSC11PN02 3.81 mm pitch, 11-pin, spring clamp type (2 items)
FC6A-PMSC17PN02 3.81 mm pitch, 17-pin, spring clamp type (2 items)
Product Name Function Type No. Comments
35 mm wide DIN rail (length: 1,000 mm) Aluminum, used when mounting a rail BAA1000PN10 10 items
35 mm wide DIN rail (length: 1,000 mm) Steel, used when mounting a rail BAP1000PN10 10 items
Bracket
Used to fix CPU modules, expansion modules, and HMI modules
on a rail
BNL6PN10 10 items
20-pin connector 20-pin MIL connector for an expansion module FC4A-PMC20P 2 items
USB maintenance cable
Cable length: 2 m (6.7 feet)
USB cable used to connect the PC and the PLC
<Connector> A: mini B
HG9Z-XCM42 1 item
USB-mini B port extension cable
(cable length: 1 m [3.28 feet])
USB cable used to extend the USB-mini B port to the panel
surface
HG9Z-XCE21 1 item
Product Name Function Reference
Ferrule manufactured by Phoenix Contact (1 cable) Ferrule used to wire the terminal block
3-35
Ferrule manufactured by Phoenix Contact (2 cables) Ferrule used to wire the terminal block
Ferrule tool manufactured by Phoenix Contact Ferrule crimping tool
Screwdriver Screwdriver used to wire the terminal block