IFM Electronic AC402S - Install the Ifm Package

SmartPLC SafeLine AC4S with fieldbus interfaces
13
>
4.2.2 Install the ifm package
42997
To install the ifm AS-i package on the programming PC/laptop:
Requirements
> CODESYS 3.5 SP9 Patch 7 Hotfix 3 is installed on the programming PC/laptop.
1 Start CODESYS
► Start CODESYS.
> CODESYS user interface appears.
2 Install "CODESYS für ifm SmartPLC SafeLine"
► Select [Tools] > [Package Manager] to start the Package Manager.
> Window [Package Manager] appears.
► Click on [Install...] to start the installation dialogue.
► Select file ifm_SmartPLC_SafeLine_V1_5_2_10.package and carry out complete installation.
> Window [Package Manager] shows installed ifm package.
► Click on [Exit] to close the Package Manager.
► Note the remarks about the correct start of the programming system CODESYS Safety.
→Start CODESYS (→ S. 14)
>
4.2.3 Uninstall ifm package
42547
To uninstall the package "CODESYS für ifm SmartPLC SafeLine":
1 Start CODESYS
► Start CODESYS with administrator rights.
> CODESYS programming interface appears.
2 Uninstall the ifm package
► Select [Tools] > [Package Manager] to access the package manager.
> Window [Package Manager] shows the installed packages.
► Activate [Display version] checkbox.
> The window shows the version numbers of the installed packages.
► Select the package version to be uninstalled
► Click on [Uninstall...] to uninstall the selected package.
> The selected package version is uninstalled.
► Click on [Exit] to close the Package Manager.