IFM Electronic AC402S - Process Data of the Non-Safe Local Devices

SmartPLC SafeLine AC4S with fieldbus interfaces
56
>
7.3.5 Process data of the non-safe local devices
43003
Access to non-safe inputs and outputs of the local I/O interface is made only via the fail-safe PLC of
AC4S.
 To access the input/output data of the non-safe devices at the local I/O interface:
→Local I/O interface: Access non-safe inputs/outputs (→ S. 78)
 To transfer process data between Standard PLC and fail-safe PLC of AC4S:
→Data exchange between standard PLC and fail-safe PLC (→ S. 82)
The process data of the non-safe inputs and outputs of the local I/O interface are not
automatically updated on node [local_IO_].