IFM Electronic AC402S - Remove Safe AS-I Slave from Project

SmartPLC SafeLine AC4S with fieldbus interfaces
31
>
6.3.3 Remove safe AS-i slave from project
43062
To completely remove a safe AS-i slave from the project the 2 instances of the logical device must be
deleted separately in the project tree.
1 Remove logical device from the standard area
► Mark logical device in standard area of device tree.
► Select [Edit] > [Delete].
> CODESYS removes the logical device from the standard area.
2 Remove logical device from the safety area
► Mark logical device in the safety extension area of the device tree.
► Select [Edit] > [Delete].
> CODESYS removes the logical device from the safety extension area.