ILX Lightwave LDC-3700 Series User Manual

w Front Panel LASer:CAL:MDI?
W Remote
The LASer:CAL:MDI? query is
used to determine that the LDC-3700 Series Laser Diode Controller is ready
for a value to be entered during the calibration cycle of the LASer:CAL:MDI mode.
SYNTAX DIAGRAM
PARAMETERS
None. The response will be in the form:
-where
1 = ready, 0 = not ready.
Poms OF
INTEREST
After this query is issued and a response of 1 is received, the LDC-3700 Series Laser Diode
Controller
be ready for the user to enter a current value via the LASer:MDI command (see
Won 6.4.4).
In local operation, the ready state during the calibration cycle is indicated by a beep which is
issued by the LDC-3700 Series Laser Diode Controller when it is ready for a value to be
entered.
EXAMPLES
"LAS:CAL:MDI?" -response: 1, means the LDC-3700 Series Laser Diode Controller is ready
for the user to enter
a photodiode current value via the LASer:MDI command.
"Laser:Cal:Mdi?" -response:
0, means the LDC-3700 Series Laser Diode Controller is not yet
ready for the user to enter a photodiode current value.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ILX Lightwave LDC-3700 Series Specifications

General

Brand	ILX Lightwave
Model	LDC-3700 Series
Category	Controller
Language	English