ILX Lightwave LDC-3700 Series User Manual

Front Panel LASer:LDV?
W Remote
The LASer:LDV? query returns the value of the measured laser voltage.
SYNTAX DIAGRAM
PARAMETERS
POINTS
OF
INTEREST
EXAMPLES
Front Panel
Remote
None. The response will
be in the form:
-where the response is an
<nrf value>.
Response is the measured laser output voltage, for either low or high bandwidth modes.
This measurement is updated approximately once every 600 mSec.
"LAS:ldv?" -response: 3.03, means the measured laser output voltage is 3.03 volts.
"Laser:LDV?" -response:
1.0, means the measured laser output voltage is 1.000 volt.
The LASer:LIMit: command path is used to get to the LDC-3700
Series Laser Diode Controller's laser limit
commands.
The following commands may be reached directly from the LASer:LIMit: command path.
LASer:LIMit:I
1 (LDC-37 12 and LDC-3712B) LASer:LIMit:IS, (LDC-3712 and LDC-3722B)
LASer:LIMit:Il? (LDC-3712 and LDC-3742B) LASer:LIMit:IS? (LDC-3712 and LDC-3722B)
LASer:LIMit:I2 (LDC-3722B) LASer:LLMit:MDP
LASer:LIMit:IZ? (LDC-3722B) LASer:LIMit:MDP?
LASer:LIMit:I3 (LDC-3742B)
LASer:LIMit:I3'? (LDC-3712B)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ILX Lightwave LDC-3700 Series Specifications

General

Brand	ILX Lightwave
Model	LDC-3700 Series
Category	Controller
Language	English