H
Front Panel
LASer:LIMit:I2?
I
Remote
The LASer:LIMit:I2? query returns the value of
the
LASER
current limit for
the
200
mA
range on the
LDC-3722B. (Not applicable for LDC-3742B).
SYNTAX
DIAGRAM
PARAMETERS None. The response will
be
in the form:
-where the response is an <nrf value>
POINTS
OF
INTEREST
The current
limit is valid for all modes of Laser operation.
In local operation, the limit current value is read by selecting the LIM
I
parameter, and
visually reading the LASER display.
EXAhIPLES
"LAS:LIM:IZ?" -response: 40. means the laser current limit is
40
rnA
(LDC-3722B
only).
"Laser:LIM:I2?" -response: 150, means the laser current limit is 150
mA
(LDC-3722B only).
W
Front Panel
LASer:LIMit:I3
Remote
The LASer:LIMit:I3 command sets the LASER current limit value for the
3000
mA
range on the
LDC-3712B. (Not applicable for LDC-3722B or LDC-3712).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
