ILX Lightwave LDC-3700 Series User Manual

PARAMETERS
POINTS OF
INTEREST
EXAMPLES
Front Panel
This mode of operation is constant I mode with the output lowpass filter disabled.
In local operation, the constant I mode is selected by pressing the (LASER MODE) SELECT
switch until the I,, indicator is lit.
":las:mode:ihbw* -action: enables the laser
high bandwidth constant current mode.
"LAS:Mode:IhbwM -action: enables the laser high bandwidth constant current mode.
Remote
The LASer:MODE:ILBW command selects laser constant current mode.
SYNTAX DIAGRAM
PARAMETERS
POINTS OF
INTEREST
None.
Constant I mode (low bandwidth) enables the output low bandpass filter.
In local operation, the constant I mode is selected by pressing the SELECT switch in the
LASER MODE
area of the front panel until the I indicator is lit.
"LAS:MODE:ILBW" -action:
sets the laser output for constant I mode (low bandwidth).
"Laser:Mode:ilbwn -action:
sets the laser output for constant I mode (low bandwidth).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ILX Lightwave LDC-3700 Series Specifications

General

Brand	ILX Lightwave
Model	LDC-3700 Series
Category	Controller
Language	English