ILX Lightwave LDC-3700 Series User Manual

w Front Panel LASer:MODE:MDP
W Remote
The LASer:MODE:MDP command selects laser constant power mode.
SYNTAX DIAGRAM
PARAMETERS
POINTS OF
INTEREST
EXAMPLES
W Front Panel
W Remote
/
None.
This mode of laser operation requires the laser's monitor PD feedback to maintain constan
optical power or constant monitor current.
In this mode, the displayed parameter will be either I,, (if CALMD = 0) in uA, or P, (if
CALMD > 0) in mW.
In local operation, the constant MDP mode is selected by pressing the (LASER MODE)
SELECT switch
until the P indicator is Lit
"LAS:MODE:MDPm -action: sets the laser output mode of operation to constant optical
power
mode.
"Laser:Mode:MDpM -action: sets the laser output mode of operation to constant optical power
mode.
The LASerOUTput
command turns the laser output on or off.
SYNTAX DIAGW
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ILX Lightwave LDC-3700 Series Specifications

General

Brand	ILX Lightwave
Model	LDC-3700 Series
Category	Controller
Language	English