ILX Lightwave LDC-3700 Series User Manual

LDC-3700 Series DEVICE-DEPENDENT COMMANDS (CONT.1
NAME
LAS:LDI?
LAS:LDV
LAS:LDV?
LAS:LIM:Il
LAS:LIM:Il?
LAS:LIM:I2
LAS:LIM:I2?
LAS:LIM:I3
LAS:LIM:U?
LAS:LIM:IS
LAS:LIM:I5?
LAS:LIM:MDP
LAS:LIM:MDP?
LAS:MDI
LAS:MDI?
LAS:MDP
L AS: MDP?
LAS :MODE?
LAS:MODE:JHBW
LAS :MODE:
ILB W
LAS:MODE:MDP
LAS:OUT
,AS:OUT?
NUMBER OF FUNCTION
PARAMETERS
EXPECTED
NONE
1
NONE
1
NONE
1
NONE
1
NONE
1
NONE
1
NONE
1
NONE
1
NONE
NONE
NONE
NONE
NONE
1
NONE
Used to return the constant current source measured value
(measured about every
600 d).
Used to set the laser voltage value for calibration.
Used to return the measured laser voltage value (measured
about every
600 mS).
Used to set the LASER constant current source limit value
(100
mA range for 37 12,1000 mA range for 3742B).
Used to return the LASER constant current source limit value
(100
mA range for 3712,1000 mA range for 3742B).
Used to set the LASER constant current source limit value
(200 mA range for 3722B).
Used to return the LASER constant current source limit value
(200
mA range for 3722B).
Used to set the LASER constant current source limit value
(3000
mA range for 3742B).
Used to return the LASER constant current source limit value
(3000 mA range for 3742B).
Used to set the LASER constant current source limit value (50
mA range for 3712,500 mA range for 3722B).
Used to return the LASER constant current source limit value
(50 mA range for 3712, 500 mA range for 3722B).
Used to set the constant optical power (from monitor PD) limit
value.
Used to return the optical power @om monitor PD) limit
value.
Used to set the constant optical power set point, if PD
responsivity is 0.
Used to return the monitor PD current measured value
(measured
about every 600 mSec.)
Used to set the constant optical power set point, if PD
responsivity is non-zero.
Returns the actual monitor PD power value (measured about
every
600 m-.).
Returns the mode, I (current), MBW (current, high
bandwidth) or P (optical power).
Sets the LDC-3700 Series Laser Diode Controller to constant
current,
high bandwidth mode.
Sets the LDC-3700 Series Laser Diode Controller to constant
current (low bandwidth) mode.
Sets the
LDC-3700 Series Laser Diode Controller to constant
optical power mode.
Same action
as setting the LAS OUTPUT switch on/off.
Returns the LAS OUTPUT switch status.
Table 4.2 LDC-3700 Series Laser Diode Controller Device-Dependent Commands (cont)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ILX Lightwave LDC-3700 Series Specifications

General

Brand	ILX Lightwave
Model	LDC-3700 Series
Category	Controller
Language	English