C-COM Satellite Systems Inc. Page 149 of 164
AZ Potentiometer/Encoder
Table 3: Azimuth Potentiometer Default Values
PL Potentiometer
Table 4: Polarization Potentiometer Default Values
** Note**: The A980A and A1200A Revision 3.0 Platforms as well as all New Gen
platforms, have replaced the PL Potentiometer with a PL Inclinometer (Tilt Sensor);
755A and 985A do not have movement on the PL axis thus the above table is not valid
for these units, See Table 5 for Tilt Sensor default values.
PL Inclinometer (Tilt Sensor)
Table 5: Polarization Inclinometer Default Values
To Next Page
Loading...
