C-COM Satellite Systems Inc. Page 71 of 164
7.6.4.13. SR
This menu will allow the user to configure the controller to the service used (select
modem type) for 2-way satellite communication.
Fig. 52: “SR” (Service) Configuration
1 – Two-Way Mobile Service Selection
Before communication is established with the modem, the user must define the
service in use. The iNetVu
®
7000 Series Controller supports several services,
including:
ID – iDirect Service
IS – iPSTAR Service
VA – ViaSat Service
VA – TW – Viasat Tooway Ka Service
V_SBS2 – Viasat SurfBeam2
CT – Comtech Service
RD – Radyne Service
SF – Surfbeam Service
GL – Gilat Service
TY – Tachyon Service
ST – STM Service
PD – Paradise Service
HN – Hughes Service
HN_95 – Hughes Services HN9500 Modem
HN_KA – Hughes Ka Service
ET – Romantis/Eastar Service
AV – EMS/Advent
NT – Newtec
NA - Stand Alone service - Used to locate and lock onto a manually configured satellite using the
DVB receiver unit inside of the controller independent of the modem. The manual configuration
requires:
Orbital Slot of Satellite
Receive Polarization
DVB Type
L-Band or Ku-Band Rx Frequency (kHz)
Symbol Rate (ksps)
FEC Code Rate
2 – Modem Communication Interface
TL - Telnet Interface
CM - Console Port Interface
TP – TCP Interface