Infors HT Multitron - Setting the Interior Lighting; Activating or Deactivating the Timer Function

Multitron - Operating Manual
Operation
Page 114 of 158 20 August 2020
7.7.7 Setting the Interior Lighting
Top display:
OPT and Light
The behaviour of the interior lighting can be set.
To do so, tap the SET key (the sign
Setpoint appears) and then use
the ON/OFF key to select the desired behaviour.
The following settings are possible:
 Auto : The light is activated by tapping any key. After 20 sec-
onds, the light turns off again automatically.
 on: Interior lighting is permanently on.
 OFF: Interior lighting is permanently off.
7.7.8 Activating or Deactivating the Timer Function
Top display: OPt and Timer
The timer function can be activated or deactivated. To do so, tap the
SET key (the sign
Setpoint appears) and then use the ON/OFF key
to
activate or deactivate the timer function. If the timer functions is set
to
OFF , it can no longer be selected by using the TIMER key.