Infors HT Multitron - Clamps and Other Holders

Multitron - Operating Manual
Accessories
20 August 2020 Page 65 of 158
INFORMATION
Due to limited resistance to disinfectants as well as the risk of un-
intentional detaching of flasks, Sticky Stuff is not suitable for culti-
vating pathogenic microorganisms.
Maximum rotation speed with Sticky Stuff
To ensure that the flasks do not detach from the adhesive matting,
the maximum permissible speed is limited when using adhesive mat-
ting.
INFORMATION
The following guidelines only apply to undamaged, completely dry
adhesive matting and flasks free of grease. If old or dirty adhesive
matting is used, there is a risk that flasks detach even at lower
speeds.
Schott Duran
®
glass Erlenmeyer flask Filling Maximum permissible speed
25 mm throw 50 mm throw
25 to 750 mL 20 % 250 min
-1
200 min
-1
1000 mL 20 % 300 min
-1
250 min
-1
2000 mL 20 % 300 min
-1
250 min
-1
3000 mL 20 % 350 min
-1
300 min
-1
5000 mL 20 % 300 min
-1
250 min
-1
Corning plastic Erlenmeyer flask Filling Maximum permissible speed
25 mm throw 50 mm throw
125 to 3000 mL 20 % 300 min
-1
200 min
-1
Corning plastic Fernbach flask Filling Maximum permissible speed
25 mm throw 50 mm throw
3000 mL 20 % 300 min
-1
250 min
-1
5.2 Clamps and Other Holders
For individual fitting of the universal table tray, various clamps and
holders are available.