Infors HT Multitron - Operating the Cooling Unit; Specifications and Technical Data

Multitron - Operating Manual
Options
Page 38 of 158 20 August 2020
4.1.3 Operating the Cooling Unit
Cooling is operated using the Temperature
parameter. The top alpha-
numeric display shows the actual value in °C with the symbol Temp .
The only way to see that cooling is used is that temperatures below
the ambient temperature can be reached in the incubation chamber.
For a detailed description of how to set and activate the parameters
see chapter 7.4 "Adjusting, Activating and Deactivating Parameters",
page 90.
4.1.4 Specifications and Technical Data
For detailed descriptions of the technical data, see chapter 12.5.1
"Internal Cooling", page 145.