Infors HT Multitron - Pre-Fitted Trays

Multitron - Operating Manual
Accessories
Page 58 of 158 20 August 2020
5.1.2 Pre-Fitted Trays
Pre-fitted trays are equipped with one clamp type each. They are
used if only a single size of flask is to be used for certain tasks. Unlike
the universal table tray, their holders cannot be changed.
Pre-fitted trays feature a capacity that is up to 20 % higher than an
individually equipped universal table tray. Since no drill holes have to
be taken into account in the grid, the clamps can be installed closer
together.
The following versions are available:
 Tray with steel clamps
 Tray with pin holders for microtitre and deep-well plates
 Tray with clamps for microtitre and deep-well plates
 Tray with sliding bars
 Tray with Sticky Stuff